Definition
Operational technology, or OT, is the hardware and software that monitors and controls physical equipment: a controller that keeps a freezer at temperature, a system that runs pumps at a water works, the panel that manages a building's heating. OT security is the work of keeping those systems safe from interference, so that the physical process keeps doing what it should.
The term sits beside IT security, which protects information: email, files, customer databases. When IT fails, data is lost or exposed. When OT fails, something in the physical world stops, overheats, floods or spoils.
What Counts as OT
- Industrial control systems: the controllers and supervisory software that run factories, power plants and utilities.
- Building management systems: heating, ventilation, air conditioning, lifts, lighting and access control.
- Refrigeration and cold chain controls: the system managers in supermarkets, cold stores and laboratories that set temperatures and defrost cycles and raise alarms.
- Remote access equipment: the routers and cellular modems that let an installer reach those systems from elsewhere.
How OT Security Differs From IT Security
| IT security | OT security | |
|---|---|---|
| What is protected | Information | A physical process |
| First priority | Keeping data confidential | Keeping equipment running safely |
| Result of failure | Data lost, stolen or locked | Spoiled stock, damaged equipment, fire or injury |
| Equipment lifetime | A few years | Often well over a decade |
| Updates | Frequent and often automatic | Rare, usually by a visiting technician, sometimes no longer available |
| Who looks after it | An IT team | Often an outside installer or maintenance firm |
| How it is reached | Through managed company networks | Sometimes directly from the internet, set up for the installer's convenience |
The rows on lifetime and ownership explain most OT incidents. The equipment outlives the software support for it, and the organisation that owns it often does not know how it is connected.
Worked Example: the 2026 Refrigeration Attacks
On the night of October 11 to 12, 2026, attackers changed the settings on refrigeration controllers in French supermarkets, forcing units into defrost. On November 1 to 2 it happened again in at least nine other European countries. The full account is in our refrigeration attack timeline. Each feature of OT in the table above showed up:
- Physical result. No data was reported stolen. Food was thrown away, and French authorities counted at least 15 fires.
- Old equipment. Danfoss said most of its affected units in France were legacy products that no longer receive software or security updates.
- Direct internet access. The French agency CERT-FR said that exposing a management interface to the internet is contrary to good practice, and its first recommendation was to remove that exposure.
- Outside ownership. Sweden's ICA said its affected stores used equipment connected outside its centrally managed network. The French blood service said the target was its refrigeration supplier, not its own systems.
- A fix existed. For the newer Danfoss model, a firmware update addressing known flaws had been available since August 2025, according to the trade publication Cooling Post. Many units had not been updated.
How Common Is the Problem?
- Censys counted about 134,000 hosts running industrial control services reachable from the internet in early 2026. See exposed control systems by country.
- ENISA recorded a rise in claimed intrusions into OT and industrial sites by hacktivist groups in 2025, with 37 such claims in the third quarter, while noting that verified disruption stayed limited.
- A report from the security firm Armis in October 2026 found that 73% of organisations had at least one known exploited vulnerability in their building systems, according to Facilities Dive.
The Basic Measures
Guidance issued after the attacks by CERT-FR, the EU bodies and US agencies comes down to the same short list:
- Do not leave control interfaces reachable from the public internet.
- Give remote access only through a secured connection such as a VPN.
- Change default passwords.
- Apply the manufacturer's updates, and replace equipment that can no longer be updated.
- Keep OT on a separate network from office systems.
- Set safe limits in the equipment itself, so a wrong setting cannot push it outside a safe range.
A step-by-step version for a store or facility is in how to check if a building control system is exposed online.
OT Security and the Law
In the EU, the NIS2 directive requires essential and important organisations, including food distribution, to manage cyber risk and report significant incidents. It covers OT as much as IT. Status by country is in our NIS2 enforcement tracker.
Sources
CERT-FR alert CERTFR-2026-ALE-012; ENISA Threat Landscape 2026; Censys; Facilities Dive on the October and November incidents; Cooling Post; and BleepingComputer on the US advisory. The comparison table is general explanation, not sourced data. Read November 13, 2026.